Managing The Time Functions; Temperature Probe - Bertazzoni 3100421 Instructions D'installation Et D'utilisation

/ Use
USING THE TOUCHSCREEN DISPLAY

MANAGING THE TIME FUNCTIONS

The time function allows you to manage cooking
times.
After setting the function and temperature, press
EN
the clock icon repeatedly (
time function.
Timer
To set a countdown timer, at the end of which an
audible warning will sound and a message will be
displayed. The timer does not stop the cooking
operation.
Scroll to set; the timer starts automatically.
Function available even with the oven not
operational
Cooking Time
To set a countdown timer, at the end of which
cooking will be stopped, an audible warning will
sound and a message will be displayed.
Scroll to set; the cooking time timer starts
automatically.
Start at
To set the start time and duration of cooking.
When the set time arrives, an audible warning will
sound indicating the start of cooking. When the
set duration has elapsed, cooking will stop, an
audible warning will sound and a message will be
displayed.
Scroll to set fi rst the start time and then the
cooking time.
Touch the Power button to stop cooking at any
point.
Touch the clock icon to modify the duration of the
current cooking program.
Important: if the time functions are not managed,
the duration of the cooking must be managed
manually.
18
) and choose a
TEMPERATURE PROBE (where available)
The temperature probe allows you to choose
the level of cooking by measuring the internal
temperature of the food.
Programming the temperature probe
1. Insert the sharp end of the probe into the food.
For the best results, the tip must be as close
as possible to the centre point of the food, and
not in contact with fat, bone or hollow areas.
2. Choosing the cooking function and temperature
3. Plug in the probe inside the oven (on the top
left-hand side).
4. Set the temperature you wish to obtain at the
centre of the food.
When the set temperature is measured by the
probe, cooking will stop, an audible warning will
sound and a message will be displayed.
Important: when using the temperature probe,
only the Timer function is available.