Electrical Connection; Cautions - THOMSON TIH470FLEXI Notice D'utilisation

ELECTRICAL CONNECTION

The hob must be installed in compliance with the manufacturer's instructions. Incorrect
installation may cause harm and damage to people, animals or property, for which the
manufacturer accepts no responsibility.
Before carrying out any work on the electrical section of the appliance, it must be disconnected
from the mains.
Connection to a good earth wiring system is absolutely essential.
The manufacturer accepts no responsibility for any inconvenience caused by failure to comply
with this rule.
The hob must be installed by a qualified electrician in line with all electrical and installation
applicable requirements.
Before carrying out the connection to the power supply, the voltage rating of the appliance
(stamped on the appliance rating label) must be checked for correspondence to the available
mains supply voltage, and the mains electric wiring should be capable of handling the
appliance's power rating (also indicated on the rating label).
This appliance must be connected by a competent person, using fixed wiring via a DOUBLE
POLE SWITCHED FUSED SPUR OUTLET. All supply current and earth conductors must be
able to withstand an ambient temperature of 75°C.

Cautions

• The hob must be installed by a qualified authorized person. Never try to install the
appliance by yourself.
• The hob must not be installed above refrigerators, freezers, dishwashers or tumble
dryers. Install the hob away from heat sources such as ovens or direct sunlight.
• The hob should be installed so that optimum radiation of heat is possible.
• The wall and the area above the hob should be able to withstand heat.
• To avoid any damage, the gasket and other elements in contact with the hob must be
resistant to heat.
36