Cooking Advices; Pans Quality; Pans Dimension - THOMSON TIH470FLEXI Notice D'utilisation

COOKING ADVICES

Pans quality

Adapted materials : steel, enamelled steel, cast iron, stainless-steel with
Not adapted materials : aluminium and stainless-steel without ferromagnetic bottom,
The manufacturers specify if their products are suitable for induction.
To check if pans are compatibles :
• Put a little water in a pan placed on an induction heating zone set at level [ 9 ].This water
must heat in a few seconds.
• Place a magnet on the outer bottom of the pan, it has to stuck on the bottom of the pan.
Certain pans can make noise when they are placed on an induction cooking zone. This noise
doesn't mean any failure on the appliance and doesn't influence the cooking operating.

Pans dimension

The cooking zones are, until a certain limit, automatically adapted to the diameter of the pan.
However the bottom of this pan must have a minimum of diameter according to the
corresponding cooking zone.
To obtain the best efficiency of your hob, please place the pan well in the centre of the cooking
zone.
ferromagnetic bottom, aluminium with ferromagnetic bottom.
cupper, brass, glass, ceramic, porcelain.
31