Manufacturer Declaration On Emc (Electromagnetic Compatibility) - ERKA. ERKAMETER 125 PRO Manuel De L'utilisateur

Maximum measure-
ment error for the
pulse value:
Pressure generation:
Deflation:
Automatic switch-off:
Operating conditions:
Mode of operation:
Operating time:
Service life of the
internal power supply:
storage conditions:
Dimensions:
Weight:
d. Manufacturer declaration on EMC (electromagnetic compatibility)
Manufacturer declaration – electromagnetic immunity
The Erkameter 125 PRO is intended for operation in the electromagnetic
environment specified below. The customer or the user of the
Erkameter 125 PRO must ensure that it is used in this kind of environment.
ERKA_Manual_ERKA125_PRO_11_2020.indd 39 ERKA_Manual_ERKA125_PRO_11_2020.indd 39
± 5 % of the value
Automatic, pump
Automatic
After about 30 seconds
+5 °C to +40 °C,
15% -93% max. rel. humidity (non-condensing)
The device is designed for continuous operation
Up to 200 measurements per charge
Shelf life of between 4-7 years, depending
on the manufacturer
-25 °C to +70 °C
Up to 93% max. rel. humidity (non-condensing)
Approx. 13.3cm x 7cm x 2.5cm
880 g
Subject to technical and design changes as a
result of constant product improvements.
39
26.11.2020 10:56:54 26.11.2020 10:56:54