Initial Configuration; Blood Pressure Measurement; Prior To Measuring The Blood Pressure - ERKA. ERKAMETER 125 PRO Manuel De L'utilisateur

1.3.3 INITIAL CONFIGURATION

To switch the device on, hold down the ERKA.
seconds. You will be taken directly to the initial configuration menu when
first switching on your device. This is where you can perform the following
settings:
2
2.1
Selecting the right cuff size and the correct cuff position of the blood pres-
sure cuff are critical for successful blood pressure measurement; this is the
most common source of errors for inaccurate measurements.
CORRECT CUFF POSITION
IMPORTANT:
The device is equipped with a cuff for adults as standard. This cuff is
suitable for an upper arm circumference of 27-35 cm. Other cuff sizes
can be selected for different arm circumferences.
ERKA_Manual_ERKA125_PRO_11_2020.indd 12 ERKA_Manual_ERKA125_PRO_11_2020.indd 12
DATE
Set the current date in the dd/mm/yyyy format using the navigation
buttons. Confirm the entry using the ERKA.
TIME
Set the current time in 12h or 24h format using the navigation
buttons. Confirm the entry using the ERKA.
The 12h or 24h format is configured by the language selection.
Language
Select the system language, German or English. The setting has
an effect on the date and time display. Confirm the entry using the
ERKA. -Button.

BLOOD PRESSURE MEASUREMENT

PRIOR TO MEASURING THE BLOOD PRESSURE

THE CUFF SIZE MUST BE CORRECT!
-Button for about 3
-Button
-Button.
12
26.11.2020 10:56:50 26.11.2020 10:56:50