Marmitek X-10 Home Automation - Marmitek EASYTOUCH 35 Mode D'emploi

easytouch35_manual ok
4. Display will show the Mode Setup Screen. Press and
release desired Mode key (TV, VCR, SAT, etc.) on the
rubber keypad. The LED will blink off once to indicate the
keypress acceptance.
Master Clear - To Clear all stored Learned Commands (recommended on first time
Learning)
1. Carry Steps 1 and 2 same as above.
2. Press and hold the Touchscreen "LEARN" Key until the Main Setup Screen is displayed
(after approx. 5 seconds). All Learned Command entries are now cleared.

14 Marmitek X-10 Home Automation

The ET35 remote allows you to control all electric appliances you have in your
house. In addition to transmitting infrared signals, which controls your TV, VCR, CD, SAT,
CBL, Audio and DVD, your remote is equipped with a radio transmitter sending Marmitek
X10 signals, which will enable you to control lamps and electric appliances from a
distance.
Here are some examples that you can do with your ET35 remote using home
automation mode:
• Switch on/off, dim lights while you watch TV.
• Switch on the lights at night to frighten intruders when you detect something
suspicious.
• Switch on your electric blanket before the film ends to have it warm when you go to
sleep.
For controlling your lamps or appliances, you will need additional home automation
modules. The modules are simply plugged into AC outlets with no additional wiring
required. Visit www.marmitek.com for more information.
20
6/17/03 10:30 AM Page 20
5. Display will show the Learn
Setup Screen. Press and hold
the Setup Key until the Main
Setup Screen is displayed. All
Learned Command entries
under that Mode are now
cleared.
MARMITEK