Dry Operation; Timer Operation - Toshiba RBC-IR2-PE Mode D'emploi

K7020 Modular Multi Infra Red
GB
Dry Operations
3, 4
2
1
Timer Operations
Once the timer operations are
selected, the settings are saved in the
unit's microcomputer memory.
Thereafter, the air conditioner will
start operating under the same
conditions, even when the unit has
been switched off and then on again.
1. ON/OFF TIMER Buttons
Push the ON or OFF button as
required.
• The current timer setting is
displayed along with ON/OFF
timer indicator, and the A.M. or
P .M. symbol will flash.
2. TIME ADJUST L M Buttons
• Press to set the desired time.
L
Forward
M
Backward
(in intervals of 10 minutes, and if
held in intervals of one hour)
12 12
All manuals and user guides at all-guides.com
12/1/01 11:04 am Page 12
1. MODE Button
Select the operating mode.
Press the MODE button and set the
display to DRY.
2. TEMP Button
Set the desired temperature.
• Fan speed indicates AUTO, actual
fan speed will be low.
3. START/STOP Button
Operation begins after 3 minutes.
• The ON/OFF lamp (RED) lights.
4. START/STOP Button
Stop the air conditioner.
2
4
1
3
3. RSV Reserve Button
Push this button to start the timer.
Check the TIMER lamp (AMBER) on unit.
4. CNL Cancel Button
Push to cancel timer settings.
GB
Timer Operations
1. Select ON or OFF Timer TO STOP
As required, set time using Press the START/STOP button once
L M Buttons.
again.
• The lamp goes off even if there is
2. Set with RSV still time remaining in operation.
• The ON TIME and OFF TIME are
• The ON/OFF lamp (red) lights
retained in the memory.
and timer operation starts.
• Only the ON/OFF lamp lights
TO CANCEL TIMER OPERATION
during operation.
• Amber lamp lights to show To stop the timer operation, press CNL.
Timer mode.
ON Timer
(stop ➝ operation)
The air conditioner will begin
operating at the preset time.
OFF Timer
(Operation ➝ stop) Operating lamp
Operation
The air conditioner will stop
operating at the preset time.
ON ➝ OFF Timer
(stop ➝ operation ➝ stop)
Operating lamp
At the preset times, the air
conditioner will start operating
and then it will stop again.
OFF ➝ ON Timer
(operation ➝ stop ➝ operation)
At the present times, the air
Operating lamp
conditioner will stop operating
and then it will start again. Operation
Operating lamp
13
Operation
Stop
7 AM
On
Stop
8 PM
On Off
Operation
Stop Stop
7 AM 8PM
Off
On
Operation
Stop
8 PM 7 AM
On