Manual Operation - Toshiba RBC-SR1-PE Mode D'emploi

All manuals and user guides at all-guides.com
AI R
EMOTE
M
ANUAL
The Main Isolation Switch needs to be set to the "on" position (the operation lamp flashes).
Caution
Do not turn the power OFF while the machine is in use.
If the air conditioner is to be used after a long period of mains power isolation, ensure the air
conditioner has mains power supplied for 12 hours before operation.
MODE FAN CENTRAL
FAN ONLY AUTO OPERATION
COOL HIGH STANDBY
MED PREHEAT
HEAT LOW DEFROST
AUTO FILTER
TEMP CHECK LOUVER
UNIT MANUAL
˚ C
88
TIMER CONT. OFF ON ADDRESS
88 : 88
H M
1. MODE Button
Selects the desired operation mode. Each time it
is pressed the display changes in the following
sequence:-
FAN ONLY COOL HEAT AUTO
2. FAN Button
Selects the desired fan speed mode. Each time it
is pressed, the display changes in the following
sequence.
AUTO HIGH MED LOW
In the AUTO mode, the fan speed changes
according to the room temperature.
GB
C
ONTROLLER
O
PERATION
1 2
NETWORK
REMOTE CONTROLLER
3
MODE
- +
TIMER ADJUST
CHECK FILTER
ON/OFF
4
3. TEMP ADJUST ( ) Buttons
These buttons are used to set the required room
temperatures (18-29°C).
4. ON/OFF Button
When this button is pressed, the air conditioner is
started or stopped.
Start of Heating Operation
After the preheating operation which lasts for 3 to
5 minutes with the indoor fans stopped.
– 6 –