Lionelo Riya Manuel De L'utilisateur page 13

18. Locking mechanism: to lock, press the pedal as showed by the arrow no. 1
(fig. 13). To unlock, press the pedal as showed by the arrow no. 2 (fig. 13).
19. Note: make sure the stroller is locked when immobilized.
How to adjust backrest
20. To set the seat in a sitting position, push the backrest upwards until you can
hear a distinctive click (fig. 14).
21. To lower the backrest, press the backrest adjustment lever and set the
desired position (fig. 15).
How to adjust footrest
22. To choose one of three available footrest positions, press footrest adjustment
keys (5) and then push the footrest downwards or upwards, depending on
your preferences (fig. 16).
How to adjust sunshade
23. To increase sunshade range, unzip it and pull out the additional part (fig. 17).
How to adjust bow
24. To remove a bow, press release keys (3) and take the bow out (fig. 18, 19).
If you can hear a click, it means the installation is correct.
How to assemble and disassemble carrycot (applies to 2in1 set)
25. Insert metal bars into carrycot supports (fig. 20, 21). To lock supports, pull
until you can hear a click.
26. Zip the internal covering of the carrycot and put the mattress in.
27. To fold the carrycot, follow the steps presented in points 25-26 in a reversed
order.
28. Place the carrycot on the stroller frame so that the child is facing the person
who handles the stroller (fig. 22). A click suggests the assembly is correct.
Make sure the carrycot has been properly mounted on the frame.
29. To remove the carrycot from the stroller frame, press release keys (16) on
both sides of the carrycot and then lift the carrycot (fig. 23, 24).
30. To adjust the carrycot sunshade, set it as you like (fig. 25).
31. You can move the carrycot when the handle is positioned at the angle of 90º.
‑ 13 ‑ EN