Cutting Unit Mounting - Greenlee Shear 30T Manuel D'instructions

Cutting Unit Mounting

To mount the Cutting Unit to another surface, first
unfasten the three 3/8-16 by 5/8" long hex bolts
underneath the top shelf of the service cart to free
the unit.
The following bolt pattern will be required on the new
surface. Longer bolts may be needed if attaching the unit
to a surface thicker than 12 gauge (.105 steel).
1.125
1.125
Greenlee Tools, Inc.
8.500
14.619
11
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070