Maintenance - Greenlee Shear 30T Manuel D'instructions

Maintenance

Lock out power to the Cutting Unit before performing any maintenance.
Change the hydraulic oil annually or after 10,000 cycles. Use ASTM 215 hydraulic fluid (or equal).
At least monthly, clean the inner track portions of the Cassette Frame and Die Retaining Rails. Apply a moly based,
spray lubricant to the working surfaces. A dry film lubricant such as Molykote 557 is recommended.
The material cutting dies are wear parts and will fail over time. Order additional dies through Greenlee distributors.
The unit experiences a shock during each cutting cycle which can loosen bolt connections over time. Periodically
check all fasteners on the Cutting Unit and retighten where needed.
Available Dies
KEY CAT NO. DESCRIPTION
1 1316SSTRT 13/16 X 1-5/8 Single box profile
2 158STRDSTRT 1-5/8 x 1-5/8 Single box profile
3 158SSTRT 13/16 x 1-5/8 & 1-5/8 x 1-5/8 Single
box profiles
4 158DSTRT 1-5/8 X 1-5/8 Double box back to
back profiles
5 4STRT21 1-1/16 x 2-1/8 Single box 4D profiles
6 4STRT22 2-1/8 x 2-1/8 Single box 4D profiles
7 1458TROD 1/4-20, 3/8-16, 1/2-13 & 5/8-11 Threaded Rod All mild steel rod
1
5
Note: The hot-dipped galvanized finished available from many manufacturers will often leave beads of finish on the
product and can be more difficult to get through dies.
Greenlee Tools, Inc.
COMPATIBILITY
B-Line B52, B54, & B56
Unistrut P4520, P4100, & P4000
Powerstrut PS 520 & PS 500
Superstrut A-1400 & B-1400
B-Line B22, B24, & B26
Unistrut P1000, P1100, & P2000
Powerstrut PS 200 & PS 210
Superstrut A-1200 & B-1200
B-Line B22, B24, B26 & B52, B54, B56
Unistrut P1000, P1100, P2000 & P4520, P4100, P4000
Powerstrut PS 200, PS 210 & PS 520, PS 500
Superstrut A-1200, A-1400 & B-1200, B-1400
B-Line B22A, B24A, B26A
Unistrut P1001, P1101, P2001
Powerstrut PS 200 2T3, PS 210 2T3
Superstrut A-1202 & B-1202
B-Line 4D21
B-Line 4D22
2 3
6 7
10
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
4