GE GTD72GBMNWS Manuel De L'utilisateur page 14

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Troubleshooting Tips... Before you call for service
Problem
Static occurs
No fabric softener was used
Overdrying
Synthetics, permanent press
and blends can cause static
Collars and
The dryness monitor senses
waistbands still
that the body of the clothes
wet at end of
is dry
cycle
Slight variation
This is normal
in metallic color
Dryer continues
Wrinkle Care was selected
to tumble after
display says
Complete
Door is too
Steam condenses on inner
foggy to see
door
clothes during a
steam cycle
Water seen on
Steam condenses on these
inside of door
surfaces
and top of lint
filter when
opening door
after steam
cycle
Small areas
Steam condenses on inner
on clothes are
drum
damp after
steam cycle
Inadequate load size for
Small amount of
steam cycle selected, excess
water on floor in
steam condenses inside
front of dryer
cabinet and leaks out
Water on floor
Loose water hose connection
in back of dryer
Hose missing rubber washer
at connection with valve
Water drips
Steam condenses on inner
from door when
door
opened after a
Steam Cycle
Cannot see
Steam released at different
steam at
times in the cycle
beginning of
cycle
Cannot see
The steam nozzle might be
steam during
clogged with debris from your
cycle
water supply
Garments still
Too many garments
wrinkled after
steam cycle
Lint filter not clean
Garments still
wrinkled after
Load is children/infant
steam cycle
garments
14
Possible Cause
Try a fabric softener.
Bounce
Fabric Conditioner Dryer Sheets have been approved for
®
use in all GE Appliances dryers when used in accordance with the
manufacturer's instructions
Try a fabric softener.
Adjust setting to Less Dry or Damp
Try a fabric softener.
Choose QUICK DRY or TIMED DRY to dry damp collars and
waistbands. In the future, when drying a load with collars and
waistbands, choose More Dry.
Due to the metallic properties of paint used for this unique
product,slight variations of color may occur due to viewing
angles and lighting conditions.
Ensure Wrinkle Care option is not selected. For the Steam
Refresh cycle, Wrinkle Care will automatically be turned on
and cannot be turned off.
This is normal.
This is normal
If using the STEAM Dewrinkle cycle, manually reduce the cycle
time. If using the STEAM Refresh cycle, add more garments to
the load.
If using the STEAM Dewrinkle cycle, manually reduce the cycle
time. If using the STEAM Refresh cycle, add more garments to
the load
Tighten connection.
Install rubber washer provided with hose.
This is normal.
This is normal.
Call GE Appliances at 877.959.8688 to order nozzle
replacement kit WE25M71 or to request a technician to replace
this for you.
Load fewer garments; manually increase time.
Clean lint filter
Use the Steam Refresh cycle
What To Do
49-3000198-1 01-20 GEA

Publicité

Chapitres

Table des Matières
loading

Table des Matières