7.1. RESET
A reset will restore all the factory settings. All user-pro-
grammed codes, learn functions and macros will then
be deleted.
Press the Setup button for approx. 3 seconds until
CODE SET appears in the display.
Press or to access SYSTEM SET.
Press O K to confirm. VOLUME SET will appear.
Press (six times) to select RESET SET and
confirm with O K .
The message CONFIRM WITH OK appears.
Press O K to confirm and enable the reset process.
PLEASE WAIT will appear on the display while
the factory settings are being restored.
8. Programming device codes
You need to program a four-digit code to a source key
for each device that you want to address with this uni-
versal remote control (TV, VCR, DVD, CD, AUDIO, SAT,
AUX1, AUX2, AUX3 o VB). The abbreviations on the but-
tons are only for reminder purposes. You can assign
any device to any button ("flex mode") with the excep-
tion of the TV button.
You can only assign TV device codes to the
TV button.
Your universal remote control is preprogrammed with
a number of Medion codes and its most important
DE
FR
EN
NL
21