Keurig B50 Mode D'emploi page 10

e. Repeat the procedure above in steps
b, c and d to set your desired Off Time.
f. To complete the process, press the
Menu Button one more time to exit the
programming mode.
g. To cancel, use these steps to set both
the on and off times to 12:00 AM. The
LCD Message Center will read 'OFF'.
EXAMPLE: If you chose to set the On Time at
6:15 AM and the Off Time for 10:00 PM, then
the Brewer will maintain hot water in the tank
during that time so that it is always ready for
you to brew a cup of coffee or tea. If you want-
ed a cup at a time outside this window, simply
press the Power Button and you can brew as
soon as the water is heated and the 'READY'
indicator is displayed on the LCD. In this case,
the Brewer will automatically turn off when the
time is the same as the preset Off Time.
10
4. Setting the clock.
NOTE: If power is interrupted to the
Brewer by unplugging it, or if power is lost,
follow the procedure above to reset the time
as the clock will not be visible until the time
is set.
a. Press the Menu Button.
b. The words, 'SET CLOCK' will appear on
the upper right side of the screen and
H and M will blink above the two
black buttons.
6:15
AM
SET CLOCK
H M
MENU
c. Press and Hold the H Button to scroll
through the hours quickly. When the
number displayed nears the actual time,
press and release the button to advance
one hour at a time. If the number count
passes 12, the indicator switches
between AM and PM on the LCD.
d. Press and hold the M Button to scroll
through the minutes quickly. When the
number displayed nears the actual time,
press and release the button to advance
one minute at a time.