Klarstein 10029783 Manuel page 16

Sliding wooden shelf installation and taking instruction:
• Shelf taking: According to below instruction drawing to pull out the shelf to support bracket , press two sides
of sliding roller buckles and pull out the shelf following the arrow mark (1).
• Shelf installation: According to below instruction drawing to push in the shelf alignment with two sides of
sliding roller following the arrow mark (2).
Problem
Wine cellar does not operate.
Wine cellar is not cold enough.
Turns on and off frequently.
The light does not work.
Vibrations.
Troubleshooting
Possible Cause
Not plugged in.
The appliance is turned off.
The circuit breaker tripped or the fuse is broken.
Check the temperature control setting.
External environment may require a higher setting.
The door is opened too often.
The door is not closed completely.
The door gasket does not seal properly.
The room temperature is hotter than normal.
A large amount of contents has been added to the Wine cellar.
The door is opened too often.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
Not plugged in.
The circuit breaker tripped or a blown fuse.
The bulb is out of order.
The light button is "OFF".
Check to assure that the Wine cellar is level.
16