Télécharger Imprimer la page

Foppapedretti Mammamia DIN DON Instructions De Montage Et Mode D'emploi page 3

Lit

Publicité

IMPORTANT, RETAIN FOR FUTURE
REFERNCE: READ CAREFULLY.
• Check the box contents.
• To avoid damaging the cot during assembly,
please remove all the packaging materials
on a clean, flat surface.
• ATTENTION! Assembly must be performed
by an adult only.
• IMPORTANT: To assemble the cot correctly,
carry out the assembly operations in
the indicated order. Incorrect assembly
operations could make the cot unsafe.
• WARNING: Be aware of the risk of open fire
and other sources of strong heat, such as
electric bar fires, gas fires, etc. in the near
vicinity of the cot.
• WARNING! Do not use the cot if any part is
broken, torn or missing and use only spare
parts approved by the manufacturer.
• WARNING! Do not leave anything in the cot
or place the cot close to another product,
which could provide a foothold or present a
danger of suffocation or strangulation, e.g.
strings, blind/curtain cords, etc..
• WARNING! Do not place more than one
mattress in the cot.
• The lowest position is the safest and that the
base should always be used in that position
as soon as the baby is old enough to sit up.
• If you leave the child unattended in the cot,
always make sure that the movable side is
closed.
• Important when choosing cot mattress;
There has to be at least a 500 mm distance
between the upper surface of the mattress
and the upper border of the bed sides
(highest position in case of adjustable
bedside heights) when the cot base is fixed
in its lowest position.
least a 200 mm distance between the upper
surface of the mattress and the upper border
of the bed sides (highest position in case of
adjustable bedside heights) when the cot
base is fixed in its highest position.
• This cot requires a 124x63 cm mattress.
Maximum mattress thickness: 12 cm.
-
warning
EN
There has to be at
• The dimension shall take into account that
there shall be no gap more than 30 mm
between the mattress and the sides end
ends in any position of the mattress.
• Periodically
• check that the screws are tightened correctly.
• Should any screws be loose, tighten them
to avoid the risk that any object (necklaces,
clothes, etc.) could remain entangled and
pose a risk of strangulation.
• In order to prevent falls, when baby can climb
out of the cot, stop using the cot itself.
• Use only spare parts supplied or authorized
by the manufacturer.
• Correct use and maintenance will make the
cot durable and safe over time.
CABLES
• WARNING Strangulation hazard Children
are at risk of strangling themselves with the
wire. Keep the adapter wire out of the reach
of children.
• Do not use extension leads with the AC
adapter. Only use the AC adapter supplied.
• When connecting the AC adapter to the
power outlet, DO NOT touch the end of the
connector.
• The power cables must be arranged so that
that they CANNOT be walked on or crushed
by objects/furniture. Pay particular attention
to the cables and plugs, the wall socket
connection and the connection points on
the product.

Publicité

loading