Deleting Phone Numbers Individually; Deleting All Entries; Emergency Call Unit; Outgoing Alert Message - Amplicomms BigTel 50 Alarm Plus Notice D'utilisation

Deleting phone numbers individually

• Select an entry using
• Press . The display shows DELETE?.
• Press and hold

Deleting all entries

• Select an entry using
• Press and hold
The display shows DELETE ALL?.
• Press and hold
Note: Before deleting the phone numbers, check that the entries
have been viewed.

Emergency Call Unit

The emergency call unit can be used to dial an emergency services
exchange or persons for assistance.
Note: There are several appropriate emergency service call num-
bers available, such as the Red Cross, St. John's Ambulance
Brigade, etc. In some countries emergency calls are not free of
charge.
The unit can also be used for private emergency calls within the
family, for example.

Outgoing alert message

There is a default outgoing alert message recorded on the telephone.
You can replace this message with one of your own. After activating an
automatic emergency call, the phone numbers assigned to buttons M1,
M2 and M3 are called automatically. The alert message is played repeat-
edly until your emergency call is acknowledged by the person receiving
it through pressing the "0" key. For this reason, you must end your own
alert message clearly telling the receiving party to "...take this
emergency call by pressing the 0 key!".
and
for approx. 4 s. The entry is deleted.
and
for approx. 4 s.
for approx. 4 s. again.
45
.
.