Calls List; Displaying Phone Numbers In The Calls List; Storing Numbers From The Calls List In The Phone Book - Amplicomms BigTel 50 Alarm Plus Notice D'utilisation

Calls list

Note: The caller number display function, essential for the calls list,
is a supplementary service offered by telephone network providers.
Contact your network provider for further information.
If this function is available with your telephone line, the number of the
caller and the name, if an entry in the telephone book exists, appears in
the display or is spoken when the phone rings. If the caller has sup-
pressed transmission of his phone number or it is otherwise unavailable,
a corresponding message appears in the display. The phone number is
not displayed and, as a result, is not stored in the calls list.
The idle display shows, how many entries are in the calls list and how
many of them are NEW (not yet seen). A total of 64 call numbers can be
stored in the calls list. The flashing red LED indicates new calls in the
calls list. This LED will flash as long as there are still new (not read)
calls in the calls list.
To stop flashing press

Displaying phone numbers in the calls list

• Select an entry using

Storing numbers from the calls list in the phone book

• Select an entry using
• Press and hold
MEMORY with
• The phone number is stored in the phone book without a name being
assigned. Then enter a name for the phone number (see "Editing entries
in the phonebook").
Note: When the number in the phone book is stored together with a
name, the name entered also appears in the calls list.
repeatedly.
and
and
for approx. 3 seconds and confirm COPY TO
.
44
.
.