Ringer Volume; Setting The Handset Receiver Tone; Setting The Handsfree Volume; Muting The Microphone - Amplicomms BigTel 50 Alarm Plus Notice D'utilisation

Ringer volume

You can adjust the ringer volume using the control (20) (refer to inlay
page).

Setting the handset receiver tone

You can adjust the handset receiver tone using the control (21) if the
Boost function (60 dB) is on (refer to inlay page).

Setting the handsfree volume

You can adjust the handsfree volume using the control (22) (refer to
inlay page).

Muting the microphone

The microphone in the handset can be activated and deactivated during
a telephone conversation.
Press and hold : Switch the microphone off (muting)
Release : Switch the microphone on

Dialling a telephone number using the redial function

Your telephone stores the last phone number dialled.
• Lift the handset or press and then press .

Calling back missed calls

The telephone stores the numbers of missed calls in a calls list. For
further information please refer to the chapter „Calls list" on page 45.
• Lift the handset or press , then select the desired entry using
and and press .
or alternatively
• Select the desired entry using and and press .
The loudspeaker will be switched on. If you want to proceed the call
using the handset, just lift it up. The loudspeaker will be switched off.
39