Other 1/2 Screen - Panasonic GP-VD150E Mode D'emploi

Setting the menu items
w Other 1/2 screen
w
Ot he r 1/ 2
Inst al l Posi t i o n
Pres et S peed
Pres et S cope
Digi ta l Zoom
Spee d Wi th Z o o m P O S .
Focu s Mo de
Foc us A DJ W i t h P T Z . - - - -
Retu rn
Install Position [Desktop]
Stand-alone is the only installation option available for the
unit.
Desktop: Stand-alone installation
Preset Speed [1 to 30]
There are 30 preset pan-tilt operation speeds when
regenerating the camera direction and other information
which are registered in the preset memory.
Note
w p If a high value is selected for the Preset Speed
setting, the image on the screen may shake when
operation stops.
Preset Scope [Mode A, Mode B, Mode C]
Selected here are the setting items to be recalled when
the contents of the preset memory are regenerated.
Mode A: Pan, Tilt, Zoom (including digital zoom), Focus,
Iris, Gain, White-BAL
Mode B: Pan, Tilt, Zoom (including digital zoom), Focus,
Iris
Mode C: Pan, Tilt, Zoom (including digital zoom), Focus
D e s k t o p
1 0
M o d e A
D i s a b l e
O n
A u t o
26 (E)
Digital Zoom [Disable, Enable]
"Enable" or "Disable" is set here for the digital zoom
function.
If zooming is performed toward the Tele end beyond the
maximum position when "Enable" has been selected, the
digital zoom can be operated continuously. Zooming will
stop temporarily at the position where the optical zoom
and digital zoom are switched so after it has stopped at
this position, proceed with zooming again.
When the setting is changed to "Disable" while already in
the digital zoom region, the zoom will automatically move
to the maximum position of the optical zoom.
Speed With Zoom POS. [Off, On]
"On" or "Off" is set here for the function used to adjust the
camera direction's adjustment speed in conjunction with
the zoom magnification.
When "On" is set, the panning and tilting operations will
become slower in the zoom status.
This function has no effect during preset operations.
Focus Mode [Auto, Manual]
"Auto" or "Manual" is set here for the focusing function.
Auto: The subjects are always brought into focus
automatically.
Manual: The focus is operated manually.
Switching between the focus modes is also possible by
pressing the [A/FOCUS] and [M/FOCUS] buttons on the
wireless remote controller.
Focus ADJ With PTZ. [Off, On]
"On" or "Off" is set here for the function which
compensates for out-of-focusing when it occurs during
panning, tilting or zooming operations at the manual
focus setting.
When "Off" is set, adjust the focus as required after
zooming or set the focus to the auto mode. This item can
be selected only when "Manual" has been selected as the
"Focus Mode" setting.
Return
Use this to return to the previous menu.