Prevention Of Damage - Unitec MAB 825 Mode D'emploi

Safety

Prevention of damage

CS Unitec, Inc., 22 Harbor Ave., Norwalk, CT 06850 • Toll-free: 800-700-5919 • Ph: 203-853-9522
Fax: 203-853-9921 • Email: info@csunitec.com • Website: www.csunitec.com
40
CAUTION
Potential property damage in case of inexpert handling of
the machine!
Observe the following instructions to avoid property damage:
► Before connecting the machine, compare the connection
data (voltage and frequency) on the rating plate with those
of your mains power supply. The data must correspond in
order to avoid damage to the machine.
► Always carry the machine at the handle, not by the connect-
ing lead.
► Always pull the mains lead out of the plug socket at the plug,
not at the mains lead.
► Do not pinch the connecting lead.
► Do not expose the connecting lead to heat or chemical
liquids.
► Do not pull the connecting lead across sharp edges or hot
surfaces.
► Lay the connecting lead in such a way that it cannot be
caught and wound up in the rotating part of the machine.
MAB 825/845