CAPITAL SPORTS CS Timer 4 Mode D'emploi page 11

• Press FGB for FGB timer mode and the timer displays "17 00".
• Press OK to start, stop, or resume the FGB timer.
Countdown Timer / Count-UP Timer
• Press DOWN / UP for countdown/count-up timer mode and timer will display "XX XX" / 00:00
• Set the target time by arrows &number keys following the general setting instruction above.
• Press OK to start, stop, or to resume the timer function.
Interval Timer
• The Interval Timer is for workout& rest interval timing (max 99 rounds). P1 is the working time for exercise; P2 is the
• resting time. One beep when workout time ends, and two beeps when rest time ends.
• Press the INT key to enter the interval timer function and the clock displays "XX XX".
• Press EDIT key to set the repeating rounds.
• Press EDIT key a second time to set P1 workout time and EDIT key a third time to set the P2 rest time.
• Press EDIT key a fourth time to exit with saved setting. Or EXIT key to exit without saving.
• Press Up/Dn key to decide whether the time will count up or down.
• Press OK to start the interval timer.
Power on/off Press red key to power on/off the timer
Mute Press Mute to mute the beeps if required.
Countdown Press F4 to activate / deactivate the 10 seconds countdown for preparation time before excer-
size.
According to the European waste regulation 2002/96/EG this symbol on the product or on its pa-
ckaging indicates that this product may not be treated as household waste. Instead it should be
taken to the appropriate collection point for the recycling of electrical and electronic equipment. By
ensuring this product is disposed of correctly, you will help prevent potential negative consequences
for the environment and human health, which could otherwise be caused by inappropriate waste
handling of this product. For more detailled information about recycling of this product, please con-
tact your local council or your household waste disposial service.
Manufacturer: CHAL-TEC GmbH, Wallstraße 16, 10179 Berlin, Germany
This product is conform to the following European directives:
2014/30/EU EMC)
2011/65/EC (RoHS)
General Functions
Environment Concerns
Declaration of Conformity
11