Publicité
Les langues disponibles
Les langues disponibles
EN
FLOOR TEMPERATURE OFFSET (CALIBRATION)
If the user's temperature measurement has a difference from the
controller set point, this setting is used for calibration. Note: the floor
sensor in the floor construction is much warmer than the actual tem-
peratures measured in the room. Therefore, the default setting is set
to -3 °C so that the setting range of the rotary knob is in the realistic
range of 18 °C - 24 °C.
AIR TEMPERATURE MIN AND MAX
This setting has two main functions. In Air and Dual modes, it sets the
active controller range. In all other modes it can be used as a limitation
of the maximum air temperature.
AIR TEMPERATURE OFFSET (CALIBRATION)
If the user's temperature measurement has a difference from the con-
troller set-point, this setting is used for calibration.
31
Publicité
