Black & Decker GTC18452PC Traduction De La Notice D'instructions Originale page 10

ENGLISH
If it does interfere, remove the battery and use a fine toothed
file or sharpening stone to remove the nick. If you drop the
trimmer, carefully inspect it for damage. If the blade is bent,
housing cracked, or handles broken or if you see any other
condition that may affect the trimmer's operation contact your
local BLACK+DECKER Service Center for repairs before
putting it back into use. Fertilizers and other garden chemicals
contain agents which greatly accelerate the corrosion of
metals. Do not store the unit on or adjacent to fertilizers or
chemicals. With the battery removed, use only mild soap and
a damp cloth to clean the unit. Never let any liquid get inside
the unit; never immerse any part of the unit into a liquid. Pre-
vent the blades from rusting by applying a film of light machine
oil after cleaning.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
u
Connect the brown lead to the live terminal in the new
u
plug.
Connect the blue lead to the neutral terminal.
u
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 5 A.
Troubleshooting
Problem Possible Cause
Slow running, Dry, corroded
noisy or hot blades.
blades.
Blade or blade
support bent.
Bent or damaged
teeth.
Loose blade
bolts.
Unit will not Battery not
start. installed properly.
Battery not
charged.
Lock off not fully
operated.
Battery won't Battery not
charge inserted into
charger.
10
(Original instructions)
Possible Solution
Lubricate blades.
Straighten blade or
blade support.
Straighten teeth.
Tighten blade bolts.
Check battery instal-
lation.
Check battery charg-
ing requirements.
Check lock off is fully
depressed prior to
moving main trigger.
Insert battery into
charger until green
LED appears.
Charge up to 8
hours if battery
totally drained.
Troubleshooting
Battery won't Charger not
charge plugged in.
Surrounding air
temperature too
hot or too cold.
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions.
Technical data
(PC version)
Voltage V
DC
-1
Blade strokes (no load) min
Blade length
cm
Blade gap
mm
Weight
kg
Batteries
Cat#
Vdc Weight
Cat# Ah
Kg
Amps
BL1518 BL1518
18 1.5 0.38
BL1518ST 18 1.5 0.38 BL1518ST
BL2018 18 2.0 0.39 BL2018
BL2018ST 18 2.0 0.39 BL2018ST
BL2518 18 2.5 0.43 BL2518
BL4018 18 4.0 0.64 BL4018
BL5018 18 5.0 0.7 BL5018
BL20362 BL20362
36 2.0 0.64
BL2536 36 2.5 0.68 BL2536
BL1554 BL1554
18/54 1.5 1.08
BL2554 18/54 2.5 1.2 BL2554
Plug charger into
a working outlet.
Refer to "Important
Charging Notes" for
more details. Check
current at receptacle
by plugging in
a lamp or other
appliance. Check
to see if receptacle
is connected to a
light switch which
turns power off when
you turn out the light.
Move charger and
tool to a surrounding
air temperature of
above 40 degree F
(4.5°C) or below 105
degree F (+40.5°C).
GTC1845 GTC1850 GTC18505
18 18
1300 1300 1300
45 50
18 18
2.75 2.80
Charger (minutes)
90590287* N517388* BDC1A BDC2A BDC2A36
400mA 1A 1A 2A 1.35A
225 90 90 25
225 90 90 45
300 120 120 60
300 120 120 60
380 150 150 75
600 240 240 120
750 300 300 135
X X X X
X X X X
225 90 90 45
380 150 150 75
18
50
18
3.10
X
X
X
X
X
X
X
90
110
X
X