Tool Composition; Technical Data; Symbols And Warnings; Tool Installation And Starting - CAMPAGNOLA HERCULES Manuel D'utilisation Et D'entretien

Tête de récolte
Masquer les pouces Voir aussi pour HERCULES:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 34

Tool composition

Pos.
Denomination
1
Tooth
2
Complete rake
3
Extension pole fixing clamp
4
Identification sticker
5
Clamp screws
6
Teeth holder fixing screws
7
Teeth holder
8
Oscillator
9
Oscillating mass
10
Oscillator drive
11
Fixed extension pole
12
Telescopic extension pole

Technical data

-
Weight:
-
Rake speed:

Symbols and warnings

General warning
Compulsory reading of the Use
& Maintenance Manual
Compulsory head and acoustic
protection

4 TOOL INSTALLATION AND STARTING

Connection to an extension pole

Assemble the tool onto an extension pole (11-12), insert the shaft and tighten the screws (5) of the clamp (3).

Control devices

All information can be found in the use and maintenance manual of the power unit.

5 TOOL USE

Starting the tool

Before starting your task, wear adequate safety clothing (picture A) and check that all the safety devices are well as-
sembled and can operate properly.
WARNING!
Operate the tool only when it is among the branches. Any improper use damages the tool and causes ex-
cessive battery power consumption.
Use the tool only for the purposes described in par. "Product description. Any other use may cause inju-
ries.
All information about using and operating the tool can be found in the use and maintenance manual of the
chosen power unit.
Use and maintenance manual – Translation of
original Instruction Ver.1.0 - Rev.: 02, Date : 25/01/2022
Function
Moves among the branches to make fruit fall down
Moves among the branches to make fruit fall down.
Fixes the mechanical head onto the extension pole
Shows the identification details
Fix the clamp on the extension pole
Allow to lock the teeth holder onto the mechanical head
Is the seat of the teeth
Creates the rotating movement of the mechanical head
Reduces the mechanical head vibrations
Guides the oscillator
Holds the tool
Holds the tool
870 g
1080-1150 rpm
Compulsory adequate clothing
Compulsory hand protection
Compulsory feet protection
Page 19

Publicité

Table des Matières
loading

Table des Matières