baracuda Quattro X7 Manuel Du Propriétaire page 9

Clearing the Diaphragm
If the cleaner stops, check the diaphragm
for blockage.
1. Turn cleaner over.
2. Inspect diaphragm and push through
debris or obstacles to clear.
If not blocked, check the diaphragm for
wear or damage.
To access or remove the diaphragm:
1. Release the handle locks and fold
the handle down.
2. Remove main body cover.
3. Lift out the cleaner engine assembly
and set aside thrust washer.
4. Unscrew the outer extension pipe from
the inner extension pipe.
Main Body
Cover
Diaphragm
Handle
Locks
Thrust
Washer
9 9