baracuda Quattro X7 Manuel Du Propriétaire page 4

Quick Installation
Prepare the Pool
1. Manually vacuum the pool if excessive debris is present,
and make sure the pool filter and pump basket are clean.
2. Close the pool main drain line.
3. Adjust the return lines to blow down-
ward to break up surface circulation and
ensure complete cleaning coverage.
• Loosen the fitting lock ring
• Redirect the eyeball downward
• Retighten the lock ring
If the return fitting cannot be adjusted, the
fitting MUST be replaced with Zodiac return line
diverter (part #W90153 for 1-1/2", #W90155 for 2"
or #W24100 for pools without return fittings) .
Assemble the Hose
The hose uses easy twist-lock connectors. Push and twist the connectors on each hose section until they
lock into position with a clicking sound.
1. Connect enough hose to reach the farthest point of the pool and then add one more section.
2. Position the hose weight at the end of the first hose section, about 39 inches (1m) from the cleaner.
Skimmer or
Dedicated Suction
Cleaner Line
4 4
1 Hose
Section
Hose
Weight
Hose
Weight
Skimmer or
Dedicated Suction
Cleaner Line
1 Hose
Section