baracuda Quattro X7 Manuel Du Propriétaire page 7

Connect the Cleaner
1. Make sure the float/arm handle is
in the full upright position and
locked into place with the two
handle locks.
2. Submerge the cleaner and
flood it with water.
3. When bubbles stop coming out
of the extension pipe, connect the
hose to the cleaner by pushing
the flex-connector onto the outer
extension pipe until it locks into
position with a clicking sound.
4. Allow the cleaner to drift to the
bottom of the pool. Turn on the
pool pump and begin cleaning.
Installation is complete.
Handle
Lock
7 7