Cedes cegard/Max C/CM Mode D'emploi page 2

cegard/Max C/CM
Installation and operation manual
IMPORTANT INFORMATION
WHEN THE CEGARD/MAX C/CM LIGHT CURTAIN IS USED AS A REPLACEMENT FOR
MECHANICAL SAFETY EDGES, IT IS THE RESPONSIBILITY OF THE INSTALLER TO
ENSURE THAT ON COMPLETION, THE INSTALLATION COMPLIES WITH ALL THE
RELEVANT STATE CODES, LOCAL CODES AND REGULATIONS THAT PERTAIN TO
INFRARED AND PHOTOELECTRIC DOOR PROTECTION DEVICES!
IN CANADA, PARTICULAR ATTENTION SHOULD BE GIVEN TO CLAUSES 2.13.5.1 AND
2.13.5.2 CAN/CSA-B44-B89!
CEGARD/MAX C/CM MUST ONLY BE INSTALLED BY AUTHORIZED AND FULLY
TRAINED PERSONNEL!
DO NOT USE THIS PRODUCT FOR THE PROTECTION OF DANGEROUS MACHINERY
OR IN EXPLOSIVE ATMOSPHERES OR RADIOACTIVE ENVIRONMENTS! USE ONLY
SPECIFIC AND APPROVED TYPES OF SAFETY DEVICES FOR SUCH APPLICATIONS,
OTHERWISE SERIOUS INJURY OR DEATH MAY OCCUR!
Automatic elevator doors Automatic sliding doors
© CEDES/May 2012
2 www.cedes.com