Publicité
Les langues disponibles
Les langues disponibles
SPA ASSEMBLY:
1. Unfold the spa to lay flat. (Fig 3)
2. Plug in the filter pump to a grounded
outlet.
3. Connect the inflation hose to the center
hose connection on the Pump/Filter (Fig 4),
and press the air pump/blower button to
begin inflation (Fig 5).
Turn on air by pressing the center button on the
Pump/Filter control panel
Fig 5
NOTE: THE PUMP/FILTER UNIT WILL
MAKE A RATTLING NOISE WHILE THE
PUMP IS RUNNING WITH NO WATER.
THIS IS NOT A DEFECT. DO NOT RUN
THE UNIT WITHOUT WATER FOR MORE
THAN 15 MINUTES.
NOTE: INFLATION VALVES ARE
NUMBERED ON ITEM IN ORDER OF
INFLATION.
4. Locate floor valve. Using the air hose,
inflate until firm. Close valve completely
(Fig 6).
5. Inflate the three outer chambers in
numerical order, until they are firm and the
cover is wrinkle free and taut, starting with
the lowest valve, and working up (Fig 7).
Fig 3
Fig 4
Fig 6
Fig 7
Inflation Hose
4
3
2
7
Publicité
