Publicité
Les langues disponibles
Les langues disponibles
5. Select the desired heat level and place the
cover support and the protective cover over
the spa and seal until the water reaches the
desired temperature.
Select heat level by pressing the "HEAT ON/LEVEL"
button on the Pump/Filter control panel
Fig 16
WARNING: ALWAYS SUPERVISE CHILDREN AROUND BODIES OF WATER.
THE SPA COVER IS NOT A SUBSTITUTE FOR ADULT SUPERVISION.
1 1
HEAT ON / LEVEL
LOW - 86°F / 30°C
MED - 95°F / 35°C
HIGH - 104°F / 40°C
CONTROL PANEL OPERATION
1. FILTER ON/OFF - Turns filter unit on/off. Circulates and filters water.
2. HEAT ON/LEVEL - Turns heat on/off, as well as regulates heat level
(Low, Medium, High). Note: Filter must be turned on for heat to function.
3. AIR PUMP/BLOWER - Turns on bubbler floor. Note: Filter feature must be
turned off before bubbler floor will function.
4. JETS - Turns massaging jets on/off.
MAINTENANCE
Very little care is required for the bladder or cover.
• You may clean your spa using soap and water or mild detergent.
• Never use strong cleaning agents.
• The Spa, when clean and dry, can be deflated and stored in a cool, dry area out of
direct sunlight.
• To deflate, simply open all inflation valves after draining water.
• Avoid storing this product in areas of extreme temperatures and please take
precautions against animals and rodents.
• Remove and clean the filter twice a month, or more often if necessary. Replace as
needed.
10
2 2
Fig 17
NOTE: WHEN USING IN TEMPERATURES
UNDER 32°F HEATER MUST BE
RUNNING AT ALL TIMES.
3 3
(Product model shown may differ from actual unit)
4 4
Fig 18
Publicité
