Table Des Matières - Greenlee G1 Versi-Tugger Mode D'emploi

Table of Contents
GENERAL SAFETY ................................................3-4
SPECIFIC SAFETY .................................................5-7
CABLE PULLING OVERVIEW
Cable Pulling Glossary ............................................... 8
Planning the Pull ......................................................... 8
FUNCTIONAL DESCRIPTION
Identification ......................................................... 9-10
Specifications ........................................................... 11
OPERATION
Mounting Cordless Drill to Puller .............................. 12
Head and Boom Operation
Puller Operation .................................................. 14-15
Spooling Pulling Line/Mule Tape ...................................
Capstanning ...................................................................
Mounting a Monopod
....................................................
Attaching a Boom Extension
EXPLODED VIEW AND PARTS LISTS
G1 Versi-Tugger Puller ........................................ 19-21
Greenlee Tools, Inc.
13
..........................................
14
15
16
17
........................................
KEEP THIS MANUAL
Description
The Greenlee G1 Versi-Tugger™ is intended to be used
to pull cable through conduit and in tray. The G1 Versi-
Tugger is an attachment for pistol grip style 12-20V
cordless drills. The G1, coupled with a standard drill
or hammer drill driver such as the Makita XFD07, will
develop up to 1000lbs (4.45kN). Refer to a Greenlee
catalog for sheaves, pulling rope, and other cable
pulling accessories to create an entire cable pulling
system. No single manual can provide instructions for
every possible cable pulling application; this manual
contains general information necessary to accomplish
cable pulls of many different setups.
Safety
Safety is essential in the use and maintenance of
Greenlee tools and equipment. This instruction manual
and any markings on the tool provide information for
avoiding hazards and unsafe practices related to
the use of this tool. Observe all of the safety
information provided.
Purpose of this Manual
This manual is intended to familiarize all personnel with
the safe operation and maintenance procedures for the
Greenlee G1 Versi-Tugger Drill-Powered Cable Puller.
Keep this manual available to all personnel.
Replacement manuals are available upon request at no
charge at www.greenlee.com.
All specifications are nominal and may change as design
improvements occur. Greenlee Tools, Inc. shall not be liable for
damages resulting from misapplication or misuse of its products.
® Registered: The color green for cable pulling equipment is a
registered trademark of Greenlee Tools, Inc.
2
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
G1 Versi-Tugger™