Specifications - Greenlee G1 Versi-Tugger Mode D'emploi

Specifications

Weight (with boom) .................................................................................13.8 lb (6.3 kg)
Dimensions
Length (with boom) .........................................................................32.1 in (81.5 cm)
Width .................................................................................................9.7 in (24.6 cm)
Height ..............................................................................................10.5 in (26.7 cm)
Fits conduit sizes .............................................................................................. 1/2"–4"
Compatible Pulling Rope/Line ........... Pulling line (poly line), polyaramid and polyester
Only use the G1 Versi-Tugger with approved pistol grip style 12V-20V cordless
drills. Do not use the G1 Versi-Tugger with corded drills, right angle cordless drills,
D-handle or spade handle cordless drills, impact drills, or pistol grip style cordless
drills whose voltage is rated higher than 20V.
No-Load Speed* (Spooling 430 Poly line)
*Assumes drill output in low-speed = 500RPM and high-speed = 2000RPM Note:
pull speed is dependent on cordless drill performance
Pulling Force
Max/Peak ..................................................................................................... 1,000 lb
Constant ................................................................................................. up to 600 lb
Greenlee Tools, Inc.
measuring tape (mule tape), pulling rope 1/4" to 1/2"
LOW
83 ft/min (25.3 m/min)
11
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
G1 Versi-Tugger™
HIGH
308 ft/min (93.9 m/min)