Start The Machine; Stop The Machine; Operate The Machine; Maintenance - GreenWorks Pro 2601802 Manuel D'opérateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

WARNING
Do not store or charge battery outside.
Battery must be charged and stored indoors prior to use of the
machine.
If the machine does not start:
remove the battery pack from the machine,
charge the battery pack to 15 minutes in warm area, or
when the charging light turns green.
Install the battery pack back in the unit.
8.2

START THE MACHINE

3
2
1. Push and hold the lock-out button (2).
2. Pull the trigger (3) to start the machine.
3. Release the lock-out button (2).
WARNING
Examine the work area. Remove all stones, sticks, wire,
bones, and other debris that can ricochet because of the
rotating impeller.
If it is possible, clear the snow in the direction of the wind.
8.3

STOP THE MACHINE

1. Release the trigger (3) to stop the machine.
NOTE
English
8.4

OPERATE THE MACHINE

1. Start the machine.
2. Push the machine forward until it rides on the scraper
(14).
The forward speed is dependent on the depth and weight of
the snow.
9

MAINTENANCE

Remove the battery pack from the machine before
maintenance.
Wear correct clothing, gloves and safety glasses before
maintenance.
Use only approved replacement parts.
Do not let brake fluids, gasoline, petroleum-based materials
touch the plastic parts. Chemicals can cause damage to the
plastic, and make the plastic unserviceable.
Do not use strong solvents or detergents on the plastic
housing or components.
9.1

GENERAL MAINTENANCE

Before each use, examine the machine for damaged,
missing, or loose parts such as screws, nuts, bolts and
caps.
Tighten all the fasteners and caps correctly.
Clean the remaining snow on the machine with a brush.
9
NOTE
WARNING
WARNING
CAUTION
CAUTION
CAUTION
EN

Publicité

Table des Matières
loading

Table des Matières