Transportation And Storage; Troubleshooting; Technical Data; Limited Warranty - GreenWorks Pro 2601802 Manuel D'opérateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EN
10
TRANSPORTATION AND
STORAGE
Clean the machine before storage.
Make sure the engine is not hot when you stow the
machine.
Make sure that the machine does not have loose or
damaged parts. If it is necessary, do these steps/
instructions:
Replace the damaged parts.
Tighten the bolts.
Speak to a person of an approved service center.
Stow the machine in a locked, dry area.
Make sure that children cannot come near the machine.
When you move the machine, hold it by the top handle
and auxiliary handle.
11

TROUBLESHOOTING

Problem
The handle is not
in position.
The machine does
not start.
The engine is on,
but the impeller
does not turn.
Possible cause
Solution
The bolts are not
Adjust the height
engaged correctly.
of the handle and
make sure that the
knobs and bolts
are aligned cor-
rectly.
The battery is not
Charge the battery
charged.
by following the
procedures in the
battery and charg-
er manual.
The switch is de-
Have the switch
fective.
replaced by an au-
thorized service
center.
Battery is too cold. Remove battery
from the snow
shovel. Place bat-
tery on charger
and allow to
charge for 10 mi-
nutes or until the
changing light
turns green. Re-
move from charger
and install in snow
shovel for use.
Battery may re-
Call toll free help-
quire service or re-
line, at
placement.
1-855-345-3934 or
replace battery.
The belt is dam-
Replace the belt.
aged.
English
Problem
A thin layer of
snow stays behind.
* If you cannot find the solution to these problems, call
1-855-345-3934.
12

TECHNICAL DATA

Voltage
No load speed
Clearing width
Clearing depth
Impeller size
Weight (without battery
pack)
Battery
Charger
13

LIMITED WARRANTY

Greenworks hereby warranties this product, to the original
purchaser with proof of purchase, for a period of four (4)
years against defects in materials, parts or workmanship.
Greenworks, at its own discretion will repair or replace any
and all parts found to be defective, through normal use, free
of charge to the customer. This warranty is valid only for
units which have been used for personal use that have not
been hired or rented for industrial/commercial use, and that
have been maintained in accordance with the instructions in
the owners' manual supplied with the product from new.
ITEMS NOT COVERED BY WARRANTY:
1. Any part that has become inoperative due to misuse,
commercial use, abuse, neglect, accident, improper
maintenance, or alteration; or
2. The unit, if it has not been operated and/or maintained in
accordance with the owner's manual; or
3. Normal wear;
4. Routine maintenance items such as lubricants, blade
sharpening;
12
Possible cause
Solution
The scraper is
Replace the scra-
damaged.
per.
60 V
1800 RPM
12 in (30 cm)
6 in. (15.2 cm)
11 in (27.8 cm)
15.7 lbs (7.1 kg)
2908302CT and other BAC
series
CAC801 and other CAC ser-
ies
GARANTIE OUTIL &
BATTERIE • GARANTÍA PARA
HERRAMIENTAS Y BATERÍAS

Publicité

Table des Matières
loading

Table des Matières