GreenWorks Pro 2601802 Manuel D'opérateur page 11

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

9. Install the impeller shaft with pulley assembly attached in
the new impeller. Make sure that you replace the retained
shaft sleeve on the left side of the shaft.
10. Replace and tighten the remaining nut on the left side
plate assembly, screws on the left side cover and screws
on the pulley assembly.
English
11. Put the belt and the belt tensioner into position.
12. Replace and tighten the remaining screws on the right
side cover.
11
EN

Publicité

Table des Matières
loading

Table des Matières