Table Des Matières - Barco F400 Manuel De Sécurité

1 Safety Information
1.1 General considerations ...................................................................................................................3
1.2 Important safety instructions............................................................................................................5
1.3 Product safety labels.......................................................................................................................8
1.4 High Brightness precautions: Hazard Distance..................................................................................9
1.5 Hazard distance in function of modifying optics ............................................................................... 11
1.6 Compliance..................................................................................................................................12
1.7 Download Product Manual ............................................................................................................12
About this document
Read this document attentively. It contains important information to prevent personal injury while installing and
using the F400 projector. Furthermore, it includes several cautions to prevent damage to the F400 projector.
Ensure that you understand and follow all safety guidelines, safety instructions and warnings mentioned in this
chapter before installing the F400 projector.
Clarification of the term "F400" used in this document
When referring in this document to the term "F400" means that the content is applicable for following Barco
products:
• F400-HR, FS400-HR
Model certification name
• F400
Barco provides a guarantee relating to perfect manufacturing as part of the legally stipulated terms
of guarantee. Observing the specification mentioned in this chapter is critical for projector
performance. Neglecting this can result in loss of warranty.
1.1 General considerations
WARNING: Be aware of suspended loads.
WARNING: Wear a hard hat to reduce the risk of personal injury.
WARNING: Be careful while working with heavy loads.
WARNING: Mind your fingers while working with heavy loads.
WARNING: In case of optical radiation emergency, please disconnect the device from the mains
current; this by employing the mains switch. In case the mains switch is not easily accessible, the
projectors shall be disconnected by other means for example the mains junction box.
It is advised to employ the shutter or select a black image on the projector in order to reduce the risk
of the emergency.
Notice on optical radiation from F400 series projectors.
• Do not stare into Beam.
• This projector is Risk Group 2 (RG2) according to IEC EN 62471-5.
• The projector become Risk Group 3 (RG 3) when using lens with a throw ratio (TR) larger than 2.4.
Safety Information
R5914422 /00 F400 3