M2-Wifi: M.2 Wi-Fi Module Slot; Jbat1: Clear Cmos (Reset Bios) Jumper; Xmp Led: Xmp Status Indicator - MSI Z170M MORTAR Présentation Rapide

M2-WIFI: M.2 Wi-Fi module slot

This slot is used for a M.2 Wi-Fi module.

JBAT1: Clear CMOS (Reset BIOS) Jumper

There is CMOS memory onboard that is external powered from a battery located on
the motherboard to save system configuration data. If you want to clear the system
configuration, set the jumpers to clear the CMOS memory.
Resetting BIOS to default values
1. Power off the computer and unplug the power cord
2. Use a jumper cap to short JBAT1 for about 5-10 seconds.
3. Remove the jumper cap from JBAT1.
4. Plug the power cord and power on the computer.

XMP LED: XMP Status Indicator

This LED indicates the status of XMP.
Keep Data
(default)
Lit red when XMP is enabled.
Clear CMOS/
Reset BIOS
Overview of Components
19