Use; Description; Technical Data; System Diagram - Niko 10-01 Serie Information Produit

10-01x / 10-05x / 10-08x / 10-09x

3. USE

The kits are suitable for single-family and two-family homes. The audio kits have been pre-programmed. To ensure proper functioning, the devices simply have
to be connected as indicated (see system diagram). The manual of each device provides a detailed description of how it works. It is possible to upgrade the
kits at a later date with extra functionalities (one or more internal audio unites, one external audio unit and one relay for controlling an extra gate or enclosure).

4. DESCRIPTION

• The kits consist of 3 parts:
- a power supply (10-801)
- a flush-mounting/surface-mounting external unit with 1 bell push button (10-201, 10-151) or 2 bell push buttons (10-202, 10-152)
- a hands-free internal audio unit (10-525) or internal audio unit with receiver (10-505)
• The properties of the parts can be found in the manuals of the respective devices.

5. TECHNICAL DATA

The technical data of each device can be found in the manual supplied.

6. SYSTEM DIAGRAM

Internal unit 10-505 of
10-525
Power 10-801
supply
External unit 10-151
10-152
10-201
10-202
• Should you connect more than one internal unit (in parallel) to the system, keep in mind the maximum number of internal units. This number can
! be found in the manual of the internal audio unit with receiver (10-505) and the hands-free internal audio unit (10-525).
• Ensure that the internal units are connected according to the diagram above (line in, line out).

7. INSTALLATION

• In the kits containing two internal units (10-050, 10-055, 10-090 and 10-095), a numbered sticker (with number 1 or 2) has been applied to the
!
packaging of the internal units. This number indicates which internal unit has been assigned to which button on the external unit.
16
2
a b E P M
1
a b E P M
8-24 V
>6
18
14 15 16 17 a b P
1 3
230V~
1
a b P M
2
1
2
10-505 / 10-525
12V 1A max
10-505 / 10-525
12V 1A max
10-801
10-15x /10-20x
* remove the lamp from te push button
** aP or PP
EN