Hiq_Fr_100], [Hiq_Fi_100], And [Hiq_Mo_100] Presets - L-Acoustics 115XTHiQ Manuel D'utilisation

115XT HiQ 115XT HiQ
115XT HiQ 115XT HiQ
COAXIAL STAGE MONITOR COAXIAL STAGE MONITOR COAXIAL STAGE MONITOR COAXIAL STAGE MONITOR
user manual user manual
user manual user manual
VERSION 1.4
7.3.3

[HIQ_FR_100], [HIQ_FI_100], and [HIQ_MO_100] presets

The [HIQ_FR_100] ''FRONT'' preset features a HF shelving EQ and a 100 Hz high-pass filter for FOH applications with
subwoofers.
The [HIQ_FI_100] ''FILL'' preset results in a ''flat'' contour down to 100 Hz in free field conditions for use in speech
reinforcement, classical music, or close proximity fill applications.
The [HIQ_MO_100] ''MONITOR'' preset results in a ''flat'' contour down to 100 Hz in half-space loading conditions for
floor monitoring, wall, or ceiling-mounted applications.
Activate the LOAD PRESET menu from the LA8 amplified controller front panel and then select the desired preset.
Refer to the ''LA4'', ''LA4X'' or ''LA8'' user manual for additional instructions. The preset is also accessible using
the LA NETWORK MANAGER software (refer to the ''LA NETWORK MANAGER'' user manual). Accessible
parameters in ''HIGH-PASS'' mode are shown in the following chart:
Loudspeaker
Amplifier outputs
Elements
115XT HiQ
115XT HiQ
115XT HiQ
115XT HiQ
Note: The complimentary SB18 subwoofers must be connected to additional LA4 / LA4X or LA8 amplified controllers.
Please refer to the ''SB18'' user manual.
HiQ_UM_ML_1-4
Table 3: Accessible parameters in ''HIGH-PASS'' mode
Channels
OUT 1 PA
OUT 2 PA
OUT 3 PA
OUT 4 PA
w w w . l - a c o u s t i c s . c o m
Default parameters
Routing
Gain Delay
IN A 0 dB
0 ms
IN A 0 dB 0 ms
IN B 0 dB 0 ms
IN B 0 dB 0 ms
Polarity Mute
+ ON
+ ON
+ ON
+ ON
16 en 16
16 16