Advanced Bionics Neptune AquaMic CI-5306 Mode D'emploi page 6

If any degradation in sound quality is noticed during water use, re-
move AquaMic from head and gently shake to remove any excess
water from microphone opening.
It is recommended that you replace your AquaMic after water use
with a dry headpiece to ensure restoration of typical system sound
quality.
Note: If the AquaMic is worn following submersion in water, sound
quality may be affected. It may take up to 30 minutes for the Aqua-
Mic to dry and for typical system sound quality to be restored.
Following submersion:
• Rinse with clean water
• Remove the AquaMic from the cable
• Remove the color cap
• Gently shake any excess water from the AquaMic
• Wipe or blot the AquaMic upper surface with a soft cloth
• Place in the Zephyr by Dry & Store® or similar desiccant device
to dry completely
Dry & Store® is a registered trademark of Ear Technology Corporation
5