Olimpia splendid CALEO 2 TURBO Instructions Pour L'installation, L'emploi Et L'entretien page 26

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 33
38. The most common cause of overheating is deposits of
dust or fluff in the appliance. Ensure these deposits
are removed regularly by unplugging the appliance
and vacuum cleaning air vents and grilles.
39. Do not use abrasive cleaning products on this
appliance. Clean with a damp cloth (not wet) rinsed
in hot soapy water only. Always remove plug from the
mains supply before cleaning.
40. Do not connect the appliance to the mains voltage until
completely assembled and adjusted.
41. Switch off and use handles where provided when
moving.
42. Do not immerse the appliance in water or in other
liquids. Short circuits or fires may occur.
43. Do not let the appliance work in enclosed areas such
as a cabinet since it could cause a fire.
44. If the appliance's plug is incompatible with the socket,
have the socket replaced with a suitable one by a
qualified technician, who must ascertain that the section
of the socket cables is compatible with the power
absorbed by the appliance. We do not recommend
using adaptors and/or extension cables. If they cannot
be avoided, however, they must comply with current
safety regulations and their ampacity (A) must not be
below the maximum ampacity of the appliance.
45. Do not use the appliance in case of malfunctioning or
faults, if the cord or plug are damaged, or if it has been
dropped or damaged in any manner. Turn the appliance
off, disconnect the plug from the socket and let it be
checked by professionally qualified personnel.
EN- 8

Publicité

Table des Matières
loading

Table des Matières