Numan Two Mode D'emploi page 86

AUX MODE, ALARMS AND SLEEP TIMER
AUX MODE
Aux in mode plays audio from an external source such as an MP3 player. To play audio with Aux in mode:
•
•
•
BT MODE
Verify your device is not connected to any other BT product. Devices may pair differently. Below is a general
guide.
1. Press to source to BT mode. This will power on the BT. Turn the volume up about ¼ to start. Also turn up the
volume on the source device (the device you are streaming from).
2. Turn on the BT on your enabled device.
3. Select BT device name "NUMAN Two" when it appears on your device's screen to Initiate searching.
4. You can start to play your music files wirelessly. Adjust the volume level on your device.
You should not have to pair your device again.
Connect the external audio source to the AuxIn 3.5 mm stereo socket.
Either press Mode until the display shows AUX in or select
MENU > Main menu > AUX in.
Adjust the volume of the radio (and, if necessary, the audio source device) as
required.
86