Dab Radio Mode - Numan Two Mode D'emploi

DAB radio mode receives DAB/DAB+ digital radio and displays information about the
station, stream and track playing. To enter DAB mode, either press Mode until the display
shows DAB Radio or select:
SCANNING FOR STATIONS
The first time you select DAB radio mode, or if the station list is empty, the radio automatically performs a full
scan to see what stations are available.
You may also need to start a scan manually to update the list of stations for one of
the following reasons: Available stations change from time to time. If reception was
not good for the original scan (for example the antenna was not up), this may result in
an empty or incomplete list of available stations. If you have poor reception of some
stations (burbling), you may wish to list only stations with good signal strength. To start
a scan manually, select:
Once the scan is complete, the radio shows a list of available stations. To remove stations that are listed but
unavailable, select: MENU > Prune invalid > YES.
SELECTING STATIONS
To listen to a station or to change it, press the
Once selected, the station plays and the screen shows information about the station, track or show as broadcast.

DAB RADIO MODE

MENU > Main menu >
MENU > Scan.
MENU/BACK key, then press
79
DAB.
SELECT (knob) to select a station.