Publicité
Les langues disponibles
Les langues disponibles
Main unit connections
Front line-out terminals
A
Connect to the RCA connector of an external amplifier.
Rear line-out terminals
B
Connect to the RCA connector of an external amplifier.
C
Line-out terminals (Non fader)
This is used for non fader output. It can be used as a sub-woofer terminal if a separate amplifier with
a low bass filter is connected.
D
AUX in terminals
Connect if using together with portable audio equipment that is sold separately.
* If the output from the connected equipment is via a mini plug, it will need to be converted to RCA.
(CD5000 only)
E
E-LAN terminal (13P)
Connect to the E-LAN terminal of the CD changer, etc.
(CD5000 only)
F
LAN terminal
Connect to the LAN terminal of GPS unit.
- Vehicle connections -
Tip
• • You will need to purchase the necessary vehicle component adapter wire for the vehicle so that the
power supplies can be utilized. (Contact the dealer for further details.)
• • Be sure to wrap the connection wires with electrical tape or another insulation method to insulate them.
- Example of using vehicle adapter wires -
Power supplies
for combined
equipment
From main unit
(8P)
Vehicle component adapter wires
- 7 -
Vehicle harness
Publicité
