Changing The Power Save; Clearing Photo Settings - Lexmark 310 Serie Mode D'emploi

3
Press the up arrow button twice.
4
Press the right or left arrow button
5
Press
Select

Changing the power save

The factory default setting is 20 Min.
1
Press
Menu
The Photo menu appears.
2
Press the down arrow button until you highlight Power Save.
3
Press the right or left arrow buttons to scroll through the settings.
Your choices are Immediately, 10 Min, 20 Min, and 30 Min.
4
Press
Select

Clearing photo settings

This option lets you adjust when the current photo settings are cleared.
The settings that are affected are Number of Copies and Brightness. The
factory default setting is After 2 Minutes.
1
Press
Menu
The Photo menu appears.
2
Press the down arrow button until you highlight Clear Settings
When.
3
Press the right or left arrow buttons to scroll through the settings.
Your choices are Never and After 2 Minutes.
4
Press
Select
to save your choice.
.
to save your choice.
.
to save your choice.
to scroll through the languages.
s
24