Mectron MULTIPIEZO PRO Mode D'emploi Et Maintenance page 13

04 Û INSTALLATION
Insert the power supply cable in its
2
connection located at the back of the
device. Connect it to the power outlet;
Unscrew the cap from the bottle and fill it
3
in with the needed solution;
WARNING: each bottle can contain
liquids up to a maximum of 500 ml.
Check that the hose connected to the
4
bottle's cap is correctly installed, then screw
the cap back on its bottle;
WARNING: check that the female
coupling of the cap is clean and free from
impediments.
WARNING: check that the male
coupling on the unit is clean and that its
o-rings are not consumed.
Keep the bottle in a vertical position and
5
push it towards the unit's body until it is
firmly connected;
WARNING: Do not kipsize the bottle
as its cap is not watertight. The leaking of
the physiological solution or of aggressive
liquids can damage the sufaces.
EN
11