Section 1 Introduction; Introduction - Generac CW15 Manuel Du Propriétaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Introduction

Section 1
1.1 — I
NTRODUCTION
Thank you for purchasing this water pump manufactured
by Generac Power Systems, Inc. This is a high perfor-
mance, air-cooled, engine-driven water pump that oper-
ates at 80 or 158 GPM depending on model.
Common sense and strict compliance with the spe-
cial instructions are essential to preventing acci-
dents. The operator must read this manual and
thoroughly understand all of the instructions and warn-
ings before using the equipment. If any portion of the
manual is not understood, contact the nearest Authorized
Dealer for starting, operating and servicing procedures.
The owner is responsible for proper and safe use of the
equipment.
The water pump can operate safely, efficiently and reli-
ably only if it is properly located, operated and main-
tained. Before operating, servicing or storing:
• Study all warnings in this manual and on the product
carefully.
• Become familiar with this manual and the unit before
use.
• Refer to the Assembly section of the manual for
instructions on final assembly procedures. Follow the
instructions completely.
The manufacturer cannot anticipate every possible cir-
cumstance that might involve a hazard. The warnings in
this manual, and on tags and decals affixed to the unit
are, therefore, not all inclusive. If using a procedure, work
method or operating technique that the manufacturer
does not specifically recommend, ensure that it is safe for
others. Also make sure the procedure, work method or
operating technique utilized does not render the water
pump unsafe.
THE INFORMATION CONTAINED HEREIN WAS
BASED ON MACHINES IN PRODUCTION AT THE
TIME OF PUBLICATION. GENERAC RESERVES THE
RIGHT TO MODIFY THIS MANUAL AT ANY TIME.
Save these instructions. If you loan this device to
someone, always loan these instructions and
Owner's Manual to individual as well.
Water Pump
1.1.1 — Where to Find Us
You can contact Generac Customer Service by phone at
1-888-436-3722, or on the internet at www.generac.com.
Record model and serial number of unit on front cover for
future reference and/or service inquiries.
1

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

St20

Table des Matières