Safety Instructions - LBX instruments EVA180 Mode D'emploi

1. Safety instructions

-During the use of the equipment, use personal protective measures to avoid risks of possible damage
such as:
- Splash burns and evaporation of liquids
- Poisoning by the emission of toxic or combustible gases
- Cuts or physical damage due to the use of fragile material such as glass.
-Beware of the dangers caused by:
- Flammable materials or media with a low boiling temperature
- Overfilling of the container
- Unsafe containers
Connect the equipment to a grounded power source to ensure the safety of
the instrument and the experiment; connect power as per the equipment
requirements.
The use of this equipment in flammable, explosive, toxic or highly corrosive
experiments is prohibited.
Place the equipment on a horizontal, flat and stable table, creating a free
space of 30 cm per side, allowing you to work comfortably. Make sure the
surface is adequate for the weight of the equipment.
The equipment must be used by qualified personnel who are familiar with
the equipment and its operation through the user manual.
Do not place the equipment in areas close to heat sources.
While the machine is in operation, do not touch the heating surface to avoid
burns.
During operation, hazardous material such as flammable liquids or
pathological material must be away from this area.
Read the instruction manual before using the equipment and keep it on a
place on which it can be accessed by anyone.
Use the appropriate safety elements, such as eye protection, gloves,
according to the information provided by the reagent's manufacturer.
Pay special attention to splashes and protect yourself adequately.
3