Panel Filter - Nilfisk Advance Retriever 350B Mode D'emploi Et Liste Des Pièces

Panel Filter for Dust Control
The dust filter shall filter the dusty air sucked by the fan, and therefore must always be kept in a clean condition.
NOTE: Every time the walk-behind sweeper raises dust while sweeping the filter is dirty and requires shaking / cleaning.
To clean the dust filter operate as follows:
1 Press button 4 rhythmically for about 10-15 seconds.
2 The vibrations detach the filter dust.
NOTE: Do not hold the push button constantly to avoid damage to the electrical system.
3 About once a month, for a better machine cleaning and dust control, remove filter 1 and clean it carefully by compressed air, or by a vacuum
cleaner.
For removing the filter operate as follows:
1 Remove the debris hopper.
2 Loosen the two wing nuts 2 and remove the filter holder 3.
3 Pull filter 1 out.
Fig. 6 - Panel Filter
1

Panel Filter

2 Wing Nut
3 Filter Holder
4 Shaker push button
5 Shaker Motor
1
2
19 - FORM NO. 041324 / RETRIEVER 350B
Abb. 6 - Tafelfilter
1 Tafelfilter
2 Flügelmutter
3 Filterschablone
4 Druckknopf für rüttlers
5 Rüttler
4
5
3
Fig. 6 - Filtre à Panneau
1 Filtre à panneau
2 Ecrou à papillon
3 Stoppeur pour filtre
4 Pommeau vibreur
5 Vibreur
Fig. 6 - Filtro de Panel
1 Filtro de panel
2 Tuerca de palomilla
3 Sujección del filtro
4 Pomo vibrador
5 Martillito vibrador